Odometer/Trip Computer; Instrument Panel Illumination; Brightness Adjustment - Fiat 124 Spider Abarth 2018 User Manual

Table of Contents

Advertisement

Odometer/Trip Computer

The display mode can be changed from
odometer to "Trip computer A" to "Trip
computer B" and then back to
odometer by pushing the selector.
The selected mode will be displayed.
05020102-121-001AB
Odometer/Trip Reset Button
1 — Odometer/Trip Reset Button
When the ignition is placed in the ACC
or OFF position, the odometer or trip
will not display. Pushing the selector
can switch the trip or reset function for
a ten-minute period in the following
cases:
After the ignition is cycled to OFF
from ON.
After the driver's door is opened.
Trip Computer
The trip computer can record the total
distance of two trips. One is recorded in
"Trip A", and the other is recorded in
"Trip B".
For instance, "Trip A" can record the
distance from the point of origin, and
"Trip B" can record the distance from
where the fuel tank is filled.
Use this meter to measure trip
distances and to compute fuel
consumption.
Note:
Only the trip records tenths of miles
(kilometers).
Trip Computer Reset
The trip computer will be erased when
the power supply is interrupted (blown
fuse or the battery is disconnected) or
when the vehicle is driven over
9999.9 miles.
Instrument Panel
Illumination

Brightness Adjustment

The brightness of the instrument panel
and dashboard illuminations can be
adjusted by rotating the knob:
The brightness decreases by rotating
the knob to the left. A beep will be
heard when the knob has been rotated
to the maximum dim position.
The brightness increases by rotating
the knob to the right.
05020102-121-001AB
Dimmer Knob
1 — Instrument Cluster Illumination
Dimmer Knob
Canceling Illumination Dimmer
With the ignition ON, rotate the knob to
the right until a beep sounds while the
instrument cluster is dimmed. If the
instrument cluster's visibility is reduced
due to glare from surrounding
brightness, cancel the illumination
dimmer.
When the illumination dimmer is
canceled, the instrument cluster cannot
be dimmed even if the position lights
are turned on. When the illumination
dimmer is canceled, the screen in the
center display switches to constant
display of the daytime screen.
51

Advertisement

Table of Contents
loading

Table of Contents