Table of Contents
Advertisement
8. Install the new bulb in the reverse
order of the removal procedure.
Head Lamp Assembly
1 — High Beam Lamp
2 — Position Lamp
3 — Daytime Running Lamp
142
Mud Guard
Front Direction Indicator Lights
Proceed as follows:
1. If you are changing the right bulb,
start the engine, turn the steering wheel
all the way to the right, and turn off
engine. If you are changing the left bulb,
turn the steering wheel to the left.
2. Make sure the ignition is placed in
08020499000010
the OFF mode, and the headlight
switch is off.
3. Remove the fasteners in the five
locations and partially peel back the
mud guard.
4. Disconnect the connector from the
unit by pressing the tab on the
connector with your finger and pulling
the connector rearward.
5. Turn the socket and bulb assembly
counterclockwise and remove it.
07031501-206-002AB
Front Direction Indicator Housing
1 — Socket Assembly
2 — Bulb
6. Disconnect the bulb from the
socket.
Direction Indicator Lamp Connector
07031501-207-001
07031501-208-002AB
Advertisement
Table of Contents
