Table of Contents
Advertisement
Enhanced Accident
Response System
In the event of an impact, if the
communication network remains intact,
and the power remains intact,
depending on the nature of the event,
the ORC will determine whether to have
the Enhanced Accident Response
System perform the following functions:
Cut off fuel to the engine.
Flash hazard lights as long as the
battery has power or until the hazard
light button is pressed. The hazard
lights can be deactivated by pressing
the hazard light button.
Turn on the interior lights, which
remain on as long as the battery has
power.
Unlock the power door locks.
Enhanced Accident
Response System Reset
Procedure
In order to reset the Enhanced Accident
Response System functions after an
event, the ignition switch must be
changed from ignition START or
ON/RUN to ignition OFF. Carefully
check the vehicle for fuel leaks in the
engine compartment and on the ground
near the engine compartment and fuel
tank before resetting the system and
starting the engine.
113
Advertisement
Table of Contents
