To Increase Speed; Resume Speed - Fiat 124 Spider Abarth 2018 User Manual

Note:
The Speed Control setting cannot be
performed under the following
conditions:
Automatic Transmission: the
gear selector is in the PARK or
NEUTRAL position.
Manual Transmission: the gear
selector is in the NEUTRAL position or
when the clutch is disengaged (clutch
is depressed).
The parking brake is applied.
Release the SET (-) button at the
desired speed, otherwise the speed will
continue decreasing while the SET (-)
button is pushed and held (except
when the accelerator pedal is
depressed).
Note:
Release the SET (-) button at the
desired speed, otherwise the speed
will continue decreasing while the
SET (-) button is pushed and held
(except when the accelerator pedal is
depressed).
On a steep grade, the vehicle may
momentarily slow down while
ascending, or speed up while
descending.
The Speed Control will cancel if the
vehicle speed decreases below
16 mph (25 km/h) when climbing a
steep incline.
The Speed Control may cancel at
about 9 mph (15 km/h) below the
preset speed such as when climbing a
long, steep incline.
The vehicle's set speed is displayed in
the instrument cluster.
Increasing / Decreasing
Speed

To Increase Speed

With The Speed Control Button:
push the RES (+) button and hold it
your vehicle will accelerate. Release the
button at the desired speed. Push the
RES (+) button and release it
immediately to adjust the set speed.
Multiple operations will increase the set
speed according to the number of
times it is operated.
Using Accelerator Pedal: press the
accelerator pedal to accelerate to the
desired speed. Push the SET (-) button
and release it immediately.
Note:
Accelerate the vehicle to speed up
temporarily with the accelerator pedal
when the Speed Control is on.
Increasing the speed will not interfere
with, or change the set speed. Take
your foot off the accelerator to return to
the set speed.

Resume Speed

If any other method besides the
OFF/CAN button was used to cancel
cruising speed (such as applying the
brake pedal or pressing in the clutch
pedal) and the system is still activated,
the most recent set speed will
automatically resume when the RES (+)
button is pushed.
If vehicle speed is below 25 mph
(40 km/h), increase the vehicle speed
up to 16 mph (25 km/h) or more and
push RES (+) button.
127