Table of Contents
Advertisement
Caution!
To avoid damage to the mirror during
cleaning, never spray any cleaning solution
directly onto the mirror. Apply the solution
onto a clean cloth and wipe the mirror clean.
Push the off button ( O ) to cancel the
automatic dimming function. The
indicator light will turn off.
To reactivate the automatic dimming
function, push the on button ( I ). The
indicator light will illuminate.
Light/Rain Sensor
2 — Light Sensor
24
Note:
Do not use glass cleaner or
suspend objects on or around the light
sensor. Otherwise, light sensor
sensitivity will be affected and may not
operate normally.
The automatic dimming function is
canceled when the ignition is cycled
ON and the gear selector is in
REVERSE.
Power Mirrors
The ignition must be in the ACC or ON
position to adjust the outside power
mirrors.
Rotate the mirror switch to the left ( L )
or right ( R ) to select which mirror to
adjust.
Push the mirror control switch in the
direction of the desired position.
04060102-121-666
Power Mirror Switch
0 — Center Position
1 — Left Position
2 — Right Position
After adjusting the mirror, lock the
control by rotating the switch to the
center position to prevent accidental
movements.
04060101-L12-001
Advertisement
Table of Contents
