Option Components - YASKAWA SI-EN3 Technical Manual

4 Option Components

4 Option Components
u
SI-EN3 Single Port EtherNet/IP Option
A – Option Connector (CN5)
B – Installation hole
C – LED (MS)
D – LED (NS)
E – Grounded installation hole
<1> The ground wire packaged loose in the option shipping package is not required for installation to Z1000 bypass units.
<2> The LEDs are not visible when used in a bypass configuration. Use parameters U6-80 through U6-99 to monitor operation
status. Refer to Option Monitors on page
10
A
Underside
I
<2>
<2>
<1>
Figure 3 Option Components (Single Port)
24.
YASKAWA SIEPYAICOM22 Rev: A0 Bypass Option Single and Dual-Port EtherNet/IP SI-EN3/SI-EN3D Technical Manual
B
C
D
E
G
H
F
F – Communication connector CN1
(RJ45)
G – LED (LINK/ACT) <2>
H – LED (10/100)
<2>
I – Option Nameplate