Table of Contents
Advertisement
Stopping the engine
Run the engine at idling speed for one
or two minutes without load after oper-
ation at full power or a high coolant
temperature.
Start/stop buttons
1 STOP button
2 START button
Press STOP button 1 on the engine or
on the machine-mounted engine shut-
down facility.
!
Stop the engine immediately if any of
the following occur:
significant drops or fluctuations in
oil pressure
falling power output and engine
speed with the position sensor
(accelerator pedal) in the same
position
large amounts of exhaust smoke
emitted from the exhaust
significant increases in coolant and
oil temperature
sudden, unusual noises from the
engine or exhaust gas turbocharger
Operation
Stopping the engine
51
4
Hide quick links:
Advertisement
Table of Contents
