Telligent ® Engine System; Flame-Start System - Mercedes-Benz OM 904 LA Operating Instructions Manual

®
Telligent engine system
Electronic system warning lamp
The electronic system warning lamp must
go out after the engine has started.
If the warning lamp does not go out or if it
lights up while the engine is running, there
is a malfunction in the Telligent
system.
Each malfunction is stored in the system
with its own fault code. Temporary faults
are also stored.
Fault codes can be read using
DaimlerChrysler diagnostic equipment
(STAR DIAGNOSIS or minidiag2 tester)
( see page 29). If the electronic system
warning lamp lights up while the engine is
running, read or determine the fault code.
®
engine
Monitoring engine operation

Flame-start system*

There is a malfunction in the flame-start
system if:
the flame-start system* indicator lamp
lights up while the engine is running
the flame-start system indicator lamp
does not go out within 20 seconds of
the engine being started
Have the flame-start system checked at a
specialist workshop. DaimlerChrysler rec-
ommends that you use a Mercedes-Benz
Service Centre for this purpose as it has
the necessary specialist knowledge and
tools for the work required.
Operation
4
49