Installation Site And Its Environment; Installation - Alpha ESS Storion-SMILE5 Installation Manual

2.1 Installation Site and Environment
The following sites are not allowed for installation:
- Sites where the freezing point is reached, like garages, carports or other places.
- Sites with humidity and condensation over 85%.
- Sites which are salty and where humid air can penetrate.
- Flooded areas.
- Earthquake areas –additional security measures are required here.
- Sites with ammonia containing environment.
- Sites that are higher than 2000 meters above the sea level.
- Sites with explosive atmosphere.
- Sites with direct sunlight.
- Sites with extreme change of ambient temperature.
- Wet rooms.
- Sites with highly flammable materials or gases.
- Sites with a potentially explosive atmosphere.

2.2 Installation

Step1 Remove the battery and inverter from the packaging box.
:
Front of battery with lid off
Step2 Open battery housing case and remove communication wiring baffle (each
:
battery has two of these located on both sides). Place it aside and close the housing
case.
Note: The battery front cover should not open exceeding 90 °
Unpacking the inverter and battery
Communication
wiring baffle
Side of the battery with lid off
Alpha ESS Co., Ltd.
9
Your Smart Energy
.