System - NEC MultiSync C431 User Manual

POWER INDICATOR
POWER INDICATOR
SCHEDULE
INDICATOR
CEC*
CEC
AUTO TURN OFF
AUDIO RECEIVER
SEARCH DEVICE
RESET

SYSTEM

MONITOR INFORMATION Shows the model name, serial number and fi rmware version of your monitor.
FIRMWARE
MAC ADDRESS
FACTORY RESET
Default values can be provided on request.
Turns the LED on or off. If OFF is selected, the LED will not glow when the LCD monitor is in active mode.
Turns the LED on or off depending on a schedule activity which is set at "SCHEDULE SETTINGS". If OFF is
selected, the LED will not glow even if a schedule is in active mode.
This function enables you to control the HDMI CEC compliant device connected via HDMI connector.
*: CEC is an abbreviation of Consumer Electronics Control.
When ON is set, please set items below.
NOTE: If ON is selected, the below functions are activated.
When the connected HDMI CEC device receives a play command, the monitor synchronously turns on then
changes the input signal to HDMI. If the monitor has been turned on, when a connected HDMI CEC device
received a play command, input signal is switched to HDMI.
The connected HDMI CEC devices are controlled by the wireless remote control supplied with the monitor.
Depending on the connected device, sometimes the device does not work properly.
When the monitor goes to standby via remote control or the power button on the monitor, connected HDMI CEC
device go to standby synchronously.
NOTE: If the connected HDMI CEC device is recording, the device does not go into standby.
Activates HDMI CEC audio amplifi er. If YES is set, outputs the sounds of the connected HDMI CEC device from
the connected HDMI CEC audio amplifi er. If YES is set, the internal speaker is set to mute.
NOTE: When a HDMI CEC audio amplifi er is connected, set to YES.
Please set to NO if there is no connecting HDMI CEC audio device to the monitor.
Searches the HDMI CEC device connected to the monitor. When search is success, the connected HDMI CEC
device's type and registered device name are shown. When search has been completed or failed, the SEARCH
DEVICE is set to NO automatically. To retry the SEARCH DEVICE, set it to YES again. After detected HDMI CEC
devices, you can switch the device input by selecting the device.
Resets all the settings within the CONTROL menu back to factory setting except for LAN, CHANGE
PASSWORD, SECURITY and PING.
CARBON SAVINGS: Display the estimated carbon saving information in kg-CO2. The carbon footprint factor in
the carbon saving calculation is based on the OECD (2008 Edition).
CARBON USAGE: Display the estimated carbon usage information in kg-CO2. This is the arithmetic estimation,
not actual measurement value. This estimation is based without any options.
Displays fi rmware version that is installed to the monitor.
Displays the MAC ADDRESS.
All items are returned to factory shipment state.
NOTE: You can reset all items in all daisy chained monitors. Please be careful to avoid resetting all items
inadvertently.
English-36