Connections; Wiring Diagram - NEC MultiSync C431 User Manual

Connections

NOTE: Do not connect or disconnect cables when turning on the monitor's main power or other external equipment's power,
as this may result in a loss of the monitor image.
NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound.
Before making connections:
* First turn off the power of all the attached equipment and make connections.
* Refer to the user's manual included with each separate piece of equipment.
* We strongly recommend connecting or disconnecting a USB storage device or a microSD memory card to the monitor when
the monitor's main power is off.

Wiring Diagram

Stereo Amplifi er
DVD Player
Stereo Amplifi er
Computer
VCR Player or
DVD Player
*: Multiple monitors can have their REMOTE IN/OUT ports daisy chained together. This allows one optional remote sensor kit to be used for multiple monitors.
There is a limit to the number of monitors that can be daisy-chained together (see page 38).
Connected
Connecting terminal
equipment
DisplayPort IN
HDMI IN1
HDMI IN2
2
AV* HDMI IN3
VGA (RGB, YPbPr)
VGA (RGB, YPbPr)
VIDEO IN
DisplayPort IN
HDMI IN1
HDMI IN2
PC* 3 HDMI IN3
VGA (RGB, YPbPr)
VGA (RGB, YPbPr)
VIDEO IN
*1: Please set appropriate setting for input signal.
*2: It is recommended to set YUV in HDMI/DisplayPort MODE (See page 32).
*3: It is recommended to set RGB in HDMI/DisplayPort MODE (See page 32).
DVD Player
(component)
Devices that
require power
supply:
Ex: MP-02,
Multi presenter
stick
VCR Player or
DVD Player (Video)
Setting in
TERMINAL SETTINGS
VIDEO LEVEL: RAW/EXPAND* 1
1
VIDEO LEVEL: RAW/EXPAND*
VIDEO LEVEL: RAW/EXPAND* 1
1
VIDEO LEVEL: RAW/EXPAND*
VGA MODE: RGB
VGA MODE: YPbPr
—
1
VIDEO LEVEL: RAW/EXPAND*
VIDEO LEVEL: RAW/EXPAND* 1
1
VIDEO LEVEL: RAW/EXPAND*
VIDEO LEVEL: RAW/EXPAND* 1
VGA MODE: RGB
VGA MODE: YPbPr
—
English-15
Computer (Analog)
AV Amplifi er
DVD Player (HDMI)
DVD Player (HDMI) or
Computer (HDMI)
Computer (DisplayPort)
Solid lines = video signal
Dotted lines = audio signal
Input signal name Connecting audio terminal
DisplayPort DisplayPort
HDMI1 HDMI1
HDMI2 HDMI2
HDMI3 HDMI3
VGA (RGB) IN1/IN2
VGA (YPbPr) IN1/IN2
VIDEO IN1/IN2
DisplayPort DisplayPort
HDMI1 HDMI1
HDMI2 HDMI2
HDMI3 HDMI3
VGA (RGB) IN1/IN2
VGA (YPbPr) IN1/IN2
VIDEO IN1/IN2
Input button in
remote control
DisplayPort
HDMI1
HDMI2
HDMI3
VGA (RGB/YPbPr)
VGA (RGB/YPbPr)
VIDEO
DisplayPort
HDMI1
HDMI2
HDMI3
VGA (RGB/YPbPr)
VGA (RGB/YPbPr)
VIDEO