Wireless Remote Control - NEC MultiSync C431 User Manual

Wireless Remote Control

³
POWER ON/STANDBY button
Switches the power on/standby.
·
INPUT button
Selects the input signal.
Input signal for the Media Player is shown as MP.
»
OPTION MENU button (This button does not work)
¿
KEYPAD
Press the buttons to set and change passwords, change
channel and set REMOTE ID.
Below buttons are used for CEC (Consumer Electronics
Control) (See page 36) and the Media Player function
(See page 19): 1 , 2 , 3
´
ENT button (This button does not work)
²
DISPLAY button
Turns on/off the information OSD. See page 25.
If you lock remote control buttons using the IR LOCK
SETTINGS function, you can unlock the buttons by holding
down this DISPLAY button for more than 5 seconds.
¶
MENU button
Turns on/off the menu mode.
º
AUTO SET UP button
Enters auto setup menu. See page 28.
¾
EXIT button
Returns to the previous menu within the OSD menu.
, 5 , 6 .
English-11
µ
UP/DOWN button ( / )
Acts as button to move the highlighted area up or down
to select adjustment items within the OSD menu.
¸
MINUS/PLUS (-/+) button
Increases or decreases the adjustment level within the OSD
menu settings.
¹
SET/POINT ZOOM button
SET: When OSD is shown, this button acts as "set button"
when you make a selection.
POINT ZOOM: When OSD is not shown, this button acts as
"point zoom button".
VOLUME UP/DOWN button (VOL +/-)
Increases or decreases the audio output level.
CH/ZOOM UP/DOWN button (CH/ZOOM +/-)
Increases or decreases the POINT ZOOM level.
Please refer to POINT ZOOM (See page 50).
GUIDE button (This button does not work)
MUTE button
Turns on/off the mute function.
PICTURE MODE button
Selects the picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA], [CUSTOM1], [CUSTOM2]. See page 26.
HIGHBRIGHT: For moving images such as DVD.
STANDARD: For images.
sRGB: For text based images.
CINEMA: For movies.
CUSTOM1 and CUSTOM2: Activates the auto dimming
function. See page 35.
ASPECT button
Selects the picture aspect, [FULL], [WIDE]*, [1:1], [ZOOM]
and [NORMAL]. See page 18.
* HDMI1, HDMI2, HDMI3, VGA (YPbPr) inputs only.
AUDIO INPUT button
Selects the audio input source [IN1], [IN2], [DisplayPort],
[HDMI1], [HDMI2], [HDMI3], [MP].
STILL button
ON/OFF button: Activates/deactivates still picture mode.
NOTE: This function deactivates when selecting SCREEN
SAVER, POINT ZOOM, TILE MATRIX.
CLOSED CAPTION is not available when STILL is active.
IMAGE FLIP button (This button does not work)
ACTIVE PICTURE button (This button does not work)
MULTI PICTURE button (This button does not work)
REMOTE ID button
Activates the REMOTE ID function. See page 38.
MTS button (This button does not work)
button (This button does not work)
NOTE: The buttons with no explanation do not function.