Setting System Parameters
➤
To assign or change Night Lock/Unlock Password
1. Press a [DN] +
(X = Tenant 1~Tenant 4
Exchange line groups), with the
handset on-hook.
2. Enter a four-digit password.
3. Press
4. Hang up.
H
Night Transfer Lock Mode
C
After setting the
Night Transfer using the accompanying steps below.
➤
To set the system in Night Lock Mode
1. Press
the system into the Day or Day2
or Night Mode, with the handset
on-hook.
2. Press
3. Enter your password and press
NT Lock
Strata CT System Administrator Guide October 2000
#622X
Redial
.
Night Transfer
Night Transfer
to set
NT Lock
.
again.
The LCD prompts you to enter a four-
digit password.
As you are enter the password, the
digits display on the LCD.
You hear confirmation tone.
The password is assigned.
button into the desired ring mode (Day/Day2/Night), you can lock
The NT Lock LED flashes. The LCD
prompts you to enter your password.
= Password digits
Y
Night Transfer
NO.200
ENTER PASS CODE
NO.200
XXXX
NO.200
DATA PROGRAMMED
NO.200
JAN 15 WED 02:00
NO.200
ENTER PASSWORD
NO.200
YYYY
7