Time Zones - Ambient Weather WH2902 User Manual

Relative
[SET]
Pressure
Calibration
Light Units of
[SET]
Measure
Temperature
[SET]
Units of
Measure
Wind Units of
[SET]
Measure
Rain Units of
[SET]
Measure
Hemisphere
[SET]
Exit Set Mode
[SET]
[SET] + 2 seconds means press and hold the SET button for two seconds.
[SET] means press the SET button.

6.3.1 Time Zones

The following table summarizes time zones around the world.
Hours from
GMT
-12 IDLW: International Date Line West
-11 NT: Nome
-10 AHST: Alaska-Hawaii Standard
CAT: Central Alaska
HST: Hawaii Standard
-9 YST: Yukon Standard
-8 PST: Pacific Standard
-7 MST: Mountain Standard
-6 CST: Central Standard
-5 EST: Eastern Standard
-4 AST: Atlantic Standard
-3 ---
-2 AT: Azores
-1 WAT: West Africa
Version 1.0
Press [WIND +] or [PRESSURE -] to
adjust relative pressure up or down
Reference Section 6.4.4 for details on
calibration of relative pressure.
Press [WIND +] to change light units
of measure between lux, fc, or w/m2
Press [WIND +] to change
temperature units of measure
between °F and °C.
Press [WIND +] to change wind units
of measure between km/h, mph, knots,
m/s and bft.
Press [WIND +] to change rain units
of measure between in and mm.
Press [WIND +] to change hemisphere
between NTH (northern) and STH
(southern). This setting effects the
moon phase display.
Figure 13
Time Zone Cities
---
Nome, AK
Honolulu, HI
Yukon Territory
Los Angeles, CA, USA
Denver, CO, USA
Chicago, IL, USA
New York, NY, USA
Caracas
São Paulo, Brazil
Azores, Cape Verde Islands
---
Page 14