Page 1
Stock Code: 803/44302 King Stock Code: 803/44303 Thank you for purchasing this Rouen Bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product. For product support or spare parts please call the John Lewis Helpline;...
Page 2
Fittings and parts checklist Fittings M4 Allen Key x 1 M8 Spring Washer x 2 M5 Allen Key x 1 Nut M8 x 2 Centre Caps x 15 Screw 3.5 X 30mm x 2 Spanner M13 x 1 Side Caps x 30 M6 X 25mm Bolt x 6 Parts Headboard x 1...
Page 3
Step by step assembly instructions Step One Place Metal Bracket on Side Rails (3) over pre-inserted bolts in Headboard (1) and Footboard (2) and hand-tighten to loosely secure parts together. Do not tighten bolts with M5 Allen Key (B) until you have inserted the Centre Rail in the next step.
Page 4
Step Three Starting with the Headboard (1), insert the Front Legs (6)x2 into the pre-drilled holes on the underside of the Headboard (1) and twist to secure, as shown in the diagram below. Legs x 2 Step Four Attach the Metal Plate (7) to the bottom of Footboard (2) using bolt M6 x 25mm (E)x2 and Screw 3.5 x 30mm (H)x1. Tighten the bolt with M4 Allen Key (A).
Page 5
Step Five Starting at the headend, insert the Centre Caps (C) along the Centre Rail (5). Ensuring that the Slats (4) are facing curved side up, insert into the Centre Caps (C). Place a Side Cap (D) onto the other end of the Slats (4) and push down fully into the pre-drilled holes along the Side Rails (3), as shown in the diagram below.
Page 6
Care and Maintenance This Rouen bed should be cleaned using a soft, damp cloth and dried immediately. Do not use a very wet cloth or allow any liquid contact for a long period of time as this can permanently damage the surface.