Advertisement
Quick Links
Rose 2 Door Robe
Stock number: 803/16015
Thank you for purchasing this Rose 2 Door Robe. Please read the instructions carefully before use to ensure safe
and satisfactory operation of this product.
Pre-assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components
is given in this leaflet. If any components are missing, please contact John Lewis Customer Services or
your local branch.
1
Advertisement
Related Manuals for John Lewis Rose 803/16015
Summary of Contents for John Lewis Rose 803/16015
- Page 1 Please ensure instructions are read in full before attempting to assemble this product Necessary Tools Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact John Lewis Customer Services or your local branch.
- Page 2 This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury or damage to the product. This product takes approximately 60 MINUTES to assemble with 2 PEOPLE. The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
- Page 3 21 x 25mm 1 x Top Screws 1 x RHF 12 x30mm S. Panel Screw 1 x Dorr 1 x LHF frame & S. Panel Doors 8 x 50mm Hanging Screws Rail 1 x Base 1 x Back Unit Panel...
- Page 4 Step by step assembly instructions Step One With the aid of an assistant steadying the panels from the back, locate the Left side panel (C) and Right side panel (B) onto the Base unit (E) and ensure the dowels are squarely located and the panels are kept vertical.
- Page 5 ___________________________________________________________________________ One or more persons lift up the front section (H) with the hinges on the inside and the front inside rail with the 4 screw holes is at the bottom and place onto the top of the base unit. Push the Step Two front up against the sides (B) &...
- Page 6 _______________________________________________________________________ Step Five Locate the Top (A) as shown onto the 4 dowels and secure to the Side panels using 4 x 50mm Screws (D) ensuring the cornice runs around the front and 2 sides. Screw in 2 x 30mm (G) Screws into the front of the section Fittings D x 4...
- Page 7 __________________________________________________________________ Check that the doors are aligned correctly and if necessary adjust the door hinges as shown Step Seven below. Check that the magnets hold the door closed and that the doors are aligned correctly as shown below. Furthest screw from the door Nearest screw from the door...
- Page 8 Care and Maintenance The John Lewis Rose bedroom collection is crafted from solid Birch and Birch veneers and then hand finished with several coats of paint. Each piece is then individually distressed. This is achieved by gently rubbing by hand the top layers of finish to get to the initial coats of paint to create an authentic aged appearance.