Advertisement
Step Three
Starting with the Headboard (1), insert the Front Legs (6)x2 into the pre-drilled holes on the underside of the
Headboard (1) and twist to secure, as shown
in the diagram below.
Step Four
Attach the Metal Plate (7) to the bottom of Footboard (2) using bolt M6 x 25mm (E)x2 and Screw 3.5 x 30mm (H)x1.
Tighten the bolt with M4 Allen Key (A). Repeat process for other Footboard Leg. Next, insert Wooden Leg (6) into the
bottom of Metal Plate (7) using Spring Washer (F)x1, M8 Nut (G)x1 then tighten with Spanner M13 (I).
For Footboard Only
M6 x 25mm (E)
2
7
3
M4 (A)
M6 x 25mm (E)
3.5 x 30mm (H)
F.
6.
Spring
Legs (2)
Washer M8 (2)
6
STEP 1
M4 (A)
M6 x 25mm (E)
Yellow Sticker
face down
3.5 x 30mm (H)
M6 x 25mm (E)
2
7
3
7.
I.
Metal plates (2)
Spanner M13 (1)
3
1
STEP 2
Washer M8 (F)
3
Spanner M13 (I)
G.
H.
Screw
Nut M8 (2)
3.5 x 30mm (2)
4/6
6.
Legs x 2
2
Spring
7
6
E.
A.
M6 x 25mm Bolt (4)
x2
M4 Allen Key (1)
Advertisement
