Disconnecting Wi-Fi Direct (Simple Ap) Connection From The Control Panel; Restoring The Network Settings From The Control Panel - Epson WF-7210 series User Manual

User's Guide
3. Select Disable Wi-Fi.
4. Check the message, and then press the
5. Press the OK button.
The screen automatically closes after a specific length of time if you do not press the OK button.
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1. Select Settings on the home screen.
2. Select System Administration > Network Settings > Wi-Fi Setup > Wi-Fi Direct Setup.
3. Select Disable Wi-Fi Direct.
4. Check the message, and then press the
5. Press the OK button.
The screen automatically closes after a specific length of time if you do not press the OK button.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Select Settings on the home screen.
2. Select System Administration > Restore Default Settings > Network Settings.
3. Check the message, and then press the
4. Press the OK button.
The screen automatically closes after a specific length of time if you do not press the OK button.
Network Settings
u
button.
u
button.
u
button.
34