Static Lsps Configuration - Huawei Quidway S9300 series Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - MPLS
About This Chapter
You can set up a static LSP by manually allocating labels to LSRs. The static LSP is applicable
to stable and small-scale networks.
1.1 Introduction to Static LSPs
The static LSP cannot be set up through a label distribution protocol but can be set up by an
administrator. The static LSP is applicable to a stable and small-scaled network with the simple
topology.
1.2 Static LSPs Features Supported by the S9300
Static LSPs features supported by the system include configuring Static LSPs and Static BFD
for Static LSP.
1.3 Configuring Static LSPs
A static LSP can be set up only after each LSR is manually configured.
1.4 Configuring Static BFD for Static LSP
By configuring static BFD for static LSPs, you can detect connectivity of static LSPs.
1.5 Maintaining Static LSPs
The operations of static LSP maintenance include deleting MPLS statistics, detecting
connectivity or reachability of an LSP, and configuring the trap function on an LDP LSP.
1.6 Configuration Examples
This section provides several configuration examples of static LSPs.
Issue 04 (2011-12-26)
1

Static LSPs Configuration

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Static LSPs Configuration
1