Huawei Quidway S9300 series Configuration Manual page 39

Quidway S9300 Terabit Routing Switch
Configuration Guide - MPLS
[PE1-ospf-1-area-0.0.0.0] quit
[PE1-ospf-1] quit
# Configure P1.
[P1] ospf 1
[P1-ospf-1] area 0
[P1-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
[P1-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[P1-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[P1-ospf-1-area-0.0.0.0] quit
[P1-ospf-1] quit
# Configure P2.
[P2] ospf 1
[P2-ospf-1] area 0
[P2-ospf-1-area-0.0.0.0] network 3.3.3.3 0.0.0.0
[P2-ospf-1-area-0.0.0.0] network 10.3.1.0 0.0.0.255
[P2-ospf-1-area-0.0.0.0] network 10.4.1.0 0.0.0.255
[P2-ospf-1-area-0.0.0.0] quit
[P2-ospf-1] quit
# Configure PE2.
[PE2] ospf 1
[PE2-ospf-1] area 0
[PE2-ospf-1-area-0.0.0.0] network 4.4.4.4 0.0.0.0
[PE2-ospf-1-area-0.0.0.0] network 10.2.1.0 0.0.0.255
[PE2-ospf-1-area-0.0.0.0] network 10.4.1.0 0.0.0.255
[PE2-ospf-1-area-0.0.0.0] quit
[PE2-ospf-1] quit
Step 3 Enable basic MPLS functions on each node.
# Configure PE1.
[PE1] mpls lsr-id 1.1.1.1
[PE1] mpls
[PE1-mpls]
# Configure P1.
[P1] mpls lsr-id 2.2.2.2
[P1] mpls
[P1-mpls]
# Configure P2.
[P2] mpls lsr-id 3.3.3.3
[P2] mpls
[P2-mpls]
# Configure PE2.
[PE2] mpls lsr-id 4.4.4.4
[PE2] mpls
[PE2-mpls]
Step 4 Enable MPLS on each interface.
# Configure PE1.
[PE1] interface Vlanif 10
[PE1-Vlanif10] mpls
[PE1-Vlanif10] quit
[PE1] interface Vlanif 30
[PE1-Vlanif30] mpls
[PE1-Vlanif30] quit
Issue 04 (2011-12-26) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Static LSPs Configuration
26