Huawei Quidway S9300 series Configuration Manual page 188

Quidway S9300 Terabit Routing Switch
Configuration Guide - MPLS
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
----End
Issue 04 (2011-12-26)
Run the display isis traffic-eng network [ level-1 | level-2 | level-1-2 ] [ process-id |
[ vpn-instance vpn-instance-name | vpn6-instance vpn6-instance-name ]
check the IS-IS TE state.
Run the display isis traffic-eng statistics [ process-id | [ vpn-instance vpn-instance-
name | vpn6-instance vpn6-instance-name ]
Run the display isis traffic-eng sub-tlvs [ process-id | [ vpn-instance vpn-instance-
name | vpn6-instance vpn6-instance-name ]
Run the display explicit-path [ path-name ] [ verbose ] command to check the explicit
path.
Run the display mpls te cspf destination ip-address [ affinity properties [ mask mask-
value ] | bandwidth { ct0 ct0-bandwidth | ct1 ct1-bandwidth | ct2 ct2-bandwidth | ct3 ct3-
bandwidth | ct4 ct4-bandwidth | ct5 ct5-bandwidth | ct6 ct6-bandwidth | ct7 ct7-
*
bandwidth } | explicit-path path-name | hop-limit hop-limit-number | metric-type
{ igp | te } | priority setup-priority | srlg-strict exclude-path-name | tie-breaking
{ random | most-fill | least-fill } ]
Run the display mpls te cspf tedb { all | area area-id | interface ip-address | network-
lsa | node [ router-id ] } command to check TEDB information for CSPF.
Run the display mpls rsvp-te [ interface [ interface-type interface-number ] ] command
to check information about RSVP.
Run the display mpls rsvp-te established [ interface interface-type interface-number ]
command to check the established RSVP LSP.
Run the display mpls rsvp-te peer [ interface interface-type interface-number ] command
to check RSVP information for neighbors.
Run the display mpls rsvp-te reservation [ interface interface-type interface-number ]
command to check the RSVP reserved resource.
Run the display mpls rsvp-te request [ interface interface-type interface-number ]
command to check information about the resource for request.
Run the display mpls rsvp-te sender [ interface interface-type interface-number ]
command to check information about the RSVP sender.
Run the display mpls rsvp-te statistics { global | interface [ interface-type interface-
number ] } command to check the statistics of RSVP TE.
Run the display mpls te link-administration admission-control [ interface interface-
type interface-number | stale-interface interface-index ] command to check the tunnel
accepted by the local.
Run the display mpls te tunnel [ destination ip-address ] [ lsp-id ingress-lsr-id session-
id local-lsp-id | lsr-role { all | egress | ingress | remote | transit } ] [ name tunnel-name ]
[ { incoming-interface | interface | outgoing-interface } interface-type interface-
number ] [ verbose ] command to check the tunnel information.
Run the display mpls te tunnel statistics or display mpls lsp statistics command to check
the tunnel statistics.
Run the display mpls te tunnel-interface [ tunnel tunnel-number ] command to check the
tunnel interface on the tunnel ingress.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
] command to check the IS-IS TE state.
*
] command to check the IS-IS TE state.
*
command to check path information for CSPF.
3 MPLS TE Configuration
*
] command to
175