Huawei Quidway S9300 series Configuration Manual page 42

Terabit routing switch; mpls
Hide thumbs Also See for Quidway S9300 series:
Table of Contents

Advertisement

Quidway S9300 Terabit Routing Switch
Configuration Guide - MPLS
Bind Session Type
Bind Peer IP Address
NextHop Ip Address
Bind Interface
Static LSP name
LSP Token
FSM Board Id
Min Tx Interval (ms)
Actual Tx Interval (ms)
Local Detect Multi
Echo Passive
Proc Interface Status
WTR Interval (ms)
Disable
Active Multi
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Detect TmrID
Session Init TmrID
Session Echo Tx TmrID
PDT Index
Session Description
--------------------------------------------------------------------------------
# Run the display bfd session all verbose command on PE2 to check the configuration.
[PE2] display bfd session all verbose
--------------------------------------------------------------------------------
Session MIndex : 4096
--------------------------------------------------------------------------------
Local
Session Detect Mode
BFD Bind Type
Bind Session Type
Bind Peer IP Address
NextHop Ip Address
Bind Interface
Static LSP name
LSP Token
FSM Board Id
Min Tx Interval (ms)
Actual Tx Interval (ms)
Local Detect Multi
Echo Passive
Proc Interface Status
Disable
WTR Interval (ms)
Disable
Active Multi
Last Local Diagnostic
Bind Application
Session TX TmrID
Session Detect TmrID
Session Init TmrID
Session Echo Tx TmrID
PDT Index
Session Description
--------------------------------------------------------------------------------
Step 8 Verify the configuration.
# Run the shutdown command on VLANIF 20 of P1 to simulate a defect on a static LSP.
[P1] interface vlanif 20
[P1-Vlanif20] shutdown
# Run the display bfd session all verbose command to check the status of the BFD session.
Issue 04 (2011-12-26)
Total UP/DOWN Session Number : 1/0
Discriminator
Total UP/DOWN Session Number : 1/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: Static
: 4.4.4.4
: 10.1.1.2
: -
: LSP1
: 0x10002
: 0
: 500
: 500
: 3
: Disable
: Disable
: -
: 3
: No Diagnostic
: LSPM | L2VPN | OAM_MANAGER
: 16407
: 16408
: -
: -
: FSM-0 | RCV-0 | IF-0 | TOKEN-0
: -
State : Up
Name : PE2toPE1
: 2
: Asynchronous Mode Without Echo Function
: STATIC_LSP Bind
: Static
: 1.1.1.1
: 10.2.1.1
: -
: LSP1
: 0x10002
: 0
: 500
: 500
: 3
: Disable
: Disable
: -
Local Demand Mode
: 3
: No Diagnostic
: LSPM | L2VPN | OAM_MANAGER
: 16407
: 16408
: -
: -
: FSM-0 | RCV-0 | IF-0 | TOKEN-0
: -
1 Static LSPs Configuration
TOS-EXP
Min Rx Interval (ms)
Actual Rx Interval (ms)
Detect Interval (ms)
Acl Number
Process PST
Local Demand Mode
Session WTR TmrID
Remote Discriminator
TOS-EXP
Min Rx Interval (ms)
Actual Rx Interval (ms)
Detect Interval (ms)
Acl Number
Process PST
Session WTR TmrID
: 7
: 500
: 500
: 3000
: -
: Disable
:
: -
: 1
: 7
: 500
: 500
: 3000
: -
:
:
: -
29

Advertisement

Table of Contents
loading

Table of Contents