Chapter 3 Basic Operations — Operating with the remote control
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible
to turn off the image temporarily.
button
1)
Press the <SHUTTER> button.
f The image disappears.
f This operation can be also performed using the <SHUTTER> button on the control panel.
2)
Press the <SHUTTER> button again.
f The image is displayed.
Note
f The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed).
f You can set whether to use the mechanical shutter or not and the time for the fade in/fade out of the image using the [DISPLAY OPTION]
menu → [SHUTTER SETTING].
f If [MECHANICAL SHUTTER] in the [DISPLAY OPTION] menu → [SHUTTER SETTING] (x page 133) is set to [DISABLE], the light source
may be lit dimly due to warm‑up when the shutter function is used while the operating environment temperature is around 0 °C (32 °F).
Using the on-screen display function
Turn off the on‑screen display function (no display) when you do not wish the viewers to see the on‑screen
display, such as the menu or the input terminal name.
button
1)
Press the <ON SCREEN> button.
f Turns off (hides) the on‑screen display.
2)
Press the <ON SCREEN> button again.
f Cancels the hide condition of the on-screen display.
ENGLISH - 79