[3D Input Format]; [Left/Right Swap] - Panasonic PT-RZ21K Operating Instructions Manual

Select [6], [7], or [8] for the second and subsequent projectors.
f Stereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for
the right eye.
f "H" is output to the 3D image display and "L" is output to the 2D image display from the terminal for which
3D trigger output is selected.
Note
f [11] in [3D SYNC MODE] is the setting when the 3D IR transmitter TY‑3DTRW of Panasonic (production discontinued) is used with the
projector. Consult your dealer regarding the connection method.
f The following settings are disabled and the contrast synchronization function and shutter synchronization function cannot be used when [3D
SYNC SETTING] is set to anything other than [OFF].
g The [PICTURE] menu → [DYNAMIC CONTRAST] → [USER] → [MULTI PROJECTOR SYNC]
g The [DISPLAY OPTION] menu → [SHUTTER SETTING] → [MULTI PROJECTOR SYNC]
g The [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC]
f The [3D SYNC SETTING] setting is disabled and fixed to [OFF] when the [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC] →
[MODE] is set to anything other than [OFF].

[3D INPUT FORMAT]

Set the 3D format for the image signals being input.
Set a 3D format that matches the input signal.
1) Press as to select [3D INPUT FORMAT].
2) Press the <ENTER> button.
f The [3D INPUT FORMAT] screen is displayed.
3) Press as to select a 3D format.
[AUTO]
*1
[NATIVE]
[SIMULTANEOUS]
[SIDE BY SIDE]
[TOP AND BOTTOM]
[LINE BY LINE]
*3
[FRAME SEQUENTIAL]
*1 Only during DVI-D or HDMI input
*2 Only during 3G-SDI level B input
*3 Only while signals other than interlaced signals are input
*4 Only while progressive signals with the vertical scanning frequency of 100 Hz or 120 Hz are input to the <RGB1>/<RGB2>/<DVI-D> terminals
4) Press the <ENTER> button.
Note
f [3D INPUT FORMAT] cannot be set when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to anything other than [OFF]
and displaying the image in simultaneous format.
f When [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL] is set, 3D images
are not displayed with the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING]. In [AUTO], this only applies when 3D format can be
recognized.
f This may not function properly for some connected external devices.

[LEFT/RIGHT SWAP]

Display images by inverting the timing when the left and right images are swapped. Change the setting when
there is something wrong with the 3D image being viewed.
1) Press as to select [LEFT/RIGHT SWAP].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[SWAPPED]
Note
f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].
112 - ENGLISH
Chapter 4 Settings — [3D SETTINGS] menu
Automatically detects 3D format of input image signals to display images.
Forcibly displays 2D images regardless of input image signals.
Forcibly displays 3D images in simultaneous format regardless of input video signals.
*2
Forcibly displays 3D images in side by side format regardless of input image signals.
Forcibly displays 3D images in top and bottom format regardless of input image signals.
Forcibly displays 3D images in line by line format regardless of input video signals.
Forcibly displays 3D images in frame sequential format regardless of input image signals.
*4
Do not change the [NORMAL] setting if the 3D images are displayed correctly.
Select this item when left and right 3D images are swapped to be displayed.