[Rgb In] - Panasonic PT-RZ21K Operating Instructions Manual

[AUTO(2D)]
*1
*1 This can be set only when [SIMUL INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2].
Note
f If [AUTO(2D)] is set, 2D images are displayed when the same 2D compatible signals are entered to each input.
f If [AUTO(3D)] is set, 3D images are displayed when the same 3D compatible signals are entered to each input.
f [SIMUL INPUT SETTING] cannot be set during P IN P.
f [HDMI/DVI‑D] or [SDI1/SDI2] in [SIMUL INPUT SETTING] (including the input set as the primary input or the secondary input) is fixed to
[OFF] when the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT MODE] is set to anything other than [OFF].
f [SDI1/SDI2] in [SIMUL INPUT SETTING] is fixed to [OFF] when the [DISPLAY OPTION] menu → [SDI IN] → [SDI LINK] is set to anything
other than [SINGLE].
f This may not function properly for some connected external devices.
f This may not function properly depending on the signal.
f Usage of each input signal is displayed in [RGB1] and [RGB2], in [HDMI] and [DVI-D], and in [SDI1] and [SDI2] of the [SIMUL INPUT
SETTING] screen when [AUTO(3D)] or [AUTO(2D)] is set.
[SIMUL INPUT SETTING]
[AUTO(3D)]
[AUTO(2D)]
*1
*1 This can be set only when [SIMUL INPUT SETTING] is set to [HDMI/DVI-D] or [SDI1/SDI2].

[RGB IN]

Set to match the signal to input to the <RGB 1 IN> terminal.
Setting [RGB1 INPUT SETTING]
1) Press as to select [RGB IN].
2) Press the <ENTER> button.
f The [RGB IN] screen is displayed.
3) Press as to select [RGB1 INPUT SETTING].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[RGB/YP P ]
B R
[VIDEO]
[Y/C]
Switching the slice level of an input sync signal
1) Press as to select [RGB IN].
2) Press the <ENTER> button.
f The [RGB IN] screen is displayed.
3) Press as to select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL].
4) Press qw to switch the item.
[LOW]
[HIGH]
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays 2D image of the simultaneous format.
Usage of the input signal
[LEFT INPUT]
[RIGHT INPUT]
[1st FRAME INPUT]
[2nd FRAME INPUT]
Select this item when an RGB signal or YC
Select this item when a video signal is input to the <RGB 1 IN> (<R/P
Select this item when a luminance signal and color signal are input to the <RGB 1 IN> (<G/Y>, <B/P
C>) terminal.
Sets the slice level to [LOW].
Sets the slice level to [HIGH].
Details
Uses the signal for the corresponding input as a signal for the left
eye image.
Uses the signal for the corresponding input as a signal for the right
eye image.
Uses the signal for the corresponding input as a signal for the odd
frame.
Uses the signal for the corresponding input as a signal for the even
frame.
C /YP P signal is input to the <RGB 1 IN> terminal.
B R B R
/VIDEO>) terminal.
R
ENGLISH - 121
/
B