1. Manuals
  2. Brands
  3. ClearCube Manuals
  4. Server
  5. SmartVDI-110
  6. Quick start manual

ClearCube SmartVDI-110 Quick Start Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Container Contents
Included in
container
Not included
ClearCube Technology, Inc.
SmartVDI-110 Server Quick Start Guide
The list below shows components included in a SmartVDI-110 container.
 SmartVDI-110 Server
 Chassis mounting rails and hardware
 SATA DOM (for system startup)
 Up to four storage drives (SSD, HDD, or both)
 LSI SAS host bus adapter
™
 NVIDIA GRID
graphics card (optional, up to two)
 Teradici
®
®
PCoIP
Offload card (optional)
 Fiber NIC controller (optional)
 Power cable(s)
 This Quick Start Guide
 Motherboard documentation
 SAS host bus adapter documentation
 If included in on server configuration, documentation for graphics card and PCoIP Offload card
The list below shows items not included with a SmartVDI-110 Server.
 Monitors
 Ethernet cables (copper)
 Fiber optic cables
 Keyboard and mouse
3700 W Parmer Lane
Page 1 of 10
Austin, TX 78727
P/N G0200181 Rev A, 1.0.12.14.2015
(512) 652-3500
www.clearcube.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SmartVDI-110 and is the answer not in the manual?

Questions and answers

Related Manuals for ClearCube SmartVDI-110

Summary of Contents for ClearCube SmartVDI-110

  • Page 1  Motherboard documentation  SAS host bus adapter documentation  If included in on server configuration, documentation for graphics card and PCoIP Offload card The list below shows items not included with a SmartVDI-110 Server. Not included  Monitors  Ethernet cables (copper) ...

  • Page 2: Smartvdi-110 Overview And Features

     2 × 10GBASE-T (GbE) Ethernet LAN ports  1 × Ethernet dedicated IPMI port  Support for IPMI 2.0 SmartVDI-110 The picture and table below show indicators and buttons on the front panel of a SmartVDI-110. front panel Indicator or Description...
  • Page 3 SmartVDI-110 Overview and Features, Continued The picture below shows ports, connectors, and buttons on the rear of a SmartVDI-110. SmartVDI-110 rear ports and connectors PCoIP Offload Card (Optional) LSI Host Bust Adapter 10GBASE-T Fiber NIC (Optional) Server I/O 13 14...

  • Page 4: Rack Rails And Mounting

    Rack Rails and Mounting Two rack rail assemblies are included with a SmartVDI-110 Server. Each assembly has two sections: Rack rail components  Inner rails: attach to the workstation chassis (the inner rail is pre-attached), and  Outer rack rails: attach to rack The picture below shows the inner chassis rails and the outer rack rails.
  • Page 5 Repeat these steps to assemble the other outer rack rail. Next step: install outer rack rails in a rack. Continued on next page Page 5 of 10 P/N G0200181 Rev A, 1.0.12.14.2015 ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com...
  • Page 6 1. While carefully lifting the workstation, slide the inner rail extensions into the front of the outer rack rails. 2. Push the workstation into the rack until it clicks into the locked position. This picture and table below show how to remove a SmartVDI-110 Server from a rack. Removing from rack 1.

  • Page 7: Setting Up A Smartvdi-110 Server

    Setting up a SmartVDI-110 Server This section shows how to connect cables. Numbers in parentheses correspond to labels shown in Cabling “SmartVDI-110 front panel” and in “SmartVDI-110 rear ports and connectors” to ease identification. Step Action Install the included mounting rails to the server chassis and then install the chassis in a rack.

  • Page 8: Important Bios Settings

    BIOS setup utility. You can now use the arrow keys on the keyboard to navigate the BIOS menus. SmartVDI-110 Servers include an IPMI 2.0 + KVM (keyboard, video and mouse) management IPMI controller. This IPMI controller uses a dedicated IP address, and the default setting is for a DHCP- configuration assigned network address.
  • Page 9 Select the Above 4G Decoding option. Press ENTER. Select Disable and press ENTER. Press the F4 key to save your changes and exit the BIOS. Page 9 of 10 P/N G0200181 Rev A, 1.0.12.14.2015 ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com...

  • Page 10: Related Information And Support

    Laws are different in each country, so please check with your local authorities for proper disposal instructions. For assistance, contact ClearCube at recycle@clearcube.com. Page 10 of 10 P/N G0200181 Rev A, 1.0.12.14.2015...

Table of Contents