TRENDnet TEW-823DRU User Manual page 39

TRENDnet User's Guide
6
In Outbound Class Setting section, modify the following settings:
The fields will automatically populate when Inbound Class is configured but
ÍNote:
you can also modify the settings manually.
ͫ BW Max Outbound: Enter the maximum upload speed of your ISP (Internet Service
Provider).
ͫ Highest/High/Medium/Low/Lowest: Enter the upload speeds you would like to
apply on each state of download speeds. This setting is similar to setting the priority
speeds of each class.
7
Click Apply to save the changes.
ÍNote: To discard the changes, click Cancel.
© Copyright 2014 TRENDnet. All Rights Reserved.
8
In QoS Rule Add section, modify the following values:
ͫ Rule Enable: Check this option to enable the QoS rule.
ͫ IP/MAC Address Filter: Click on the drop-down menu and choose the type of the
IP address or MAC address. Then enter the IP address and/or MAC address to the
Address field(s).
ͫ Protocol Filter: Select the protocol you would like to apply on the QoS rule.
ͫ Port Filter: Select the port from the drop-down menu you would like to assign on the
QoS rule. Then enter the port number to the Port List field.
ͫ Class Assigned: Select the class that you have assigned to the QoS rule.
ͫ Description: Enter the QoS description that best describes the rule.
9
Click Add to save the settings.
To discard the changes, click Clear.
ÍNote:
TEW-823DRU
39