Configure Ftp Server - TRENDnet TEW-823DRU User Manual

TRENDnet User's Guide
ÍNote:
ͳ In Windows® operating system, you can access the USB storage device on your
computer in the following path: Computer > Network > USBSHARE > usb_A1.
ͳ Your computer will only be able to automatically discover the USB storage if you
are set to a workgroup under the default name "WORKGROUP". Your computer
will not be able to automatically discover the USB storage if it is connected to a
domain or configured with a different workgroup name.
ͳ In Windows® operating system, if your computer cannot discover the USB storage
automatically, you can access the files in your server, using the network map or by
typing \\<routerIPaddress>\usb_A1 on your browser's or file explorer address bar.
For example,

Configure FTP Server

Advanced > USB > FTP Server
FTP (File Transfer Protocol) is used to access shared files through the Internet. In order to
share files, you will need to plug in a USB storage device on the USB port on the back of
the router.
1
Log into your router management page (refer to
2
Click on Advanced > USB > FTP Server.
3
In Server Information section, modify the following values:
ͫ FTP Server: Select enable or disable for the feature.
ͫ Authentication: Select Enable to activate user name and password authentication in
order to access the USB storage using FTP. Select Disable to let user to anonymously
access the USB storage using FTP.
ͫ Access From Internet: Select Enable to allow access to the USB storage using FTP
over the Internet (WAN) and local (LAN) networks. Select Disable to disable FTP
access over the Internet and allow LAN access only.
4
In File Server Codepage section, you can define which character set to use when
transferring data using FTP.
It is recommended to leave these settings as default "Western European".
ÍNote:
© Copyright 2014 TRENDnet. All Rights Reserved.
.
"Log in to Management Page" on page
5
Click Apply to save the changes.
6
In User Account List section, you can add users to your FTP Server.
ͫ User Name: Enter the user name to be used to access your files.
ͫ Password: Enter the password for the user name.
ͫ Permission: Select the permission you will grant to the user. You can allow the user
Read Only or Read-Write access to the USB storage.
8).
7
Click Add to add the account.
ÍNote:
ͳ To discard the changes, click Clear.
ͳ Use Current User Account List to review all the user accounts. Click Delete to
delete the selected user account.
ÍNote: Signing up for a Dynamic DNS service (outlined in
on the Internet" on page
from the Internet. You can access your shared files over the Internet by typing,
for example ftp://<router'sWANIPaddress>
browser or file explorer address bar. You can access your share files locally by typing
ftp://<router'sLANIPaddress>
"Identify Your Network
29) will provide identification of the router's network
or ftp://myDDNSservice
in your web browser or file explorer address bar.
TEW-823DRU
in your web
41