ABB REG670 Product Manual page 142

Generator protection REG670 2.2 and Injection equipment REX060,
REX061, REX062
Product version: 2.2.1
Combiflex
Key switch for settings
Key switch for lock-out of settings via LHMI
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
Mounting kit
Side-by-side mounting kit
Injection unit for Rotor earth fault protection (RXTTE 4)
Note: Requires additional COMBIFLEX terminal base RX4, 10A COMBIFLEX sockets and
appropriate COMBIFLEX mounting accessories for proper operation
Protective resistor on plate
Configuration and monitoring tools
Front connection cable between LHMI and PC
LED Label special paper A4, 1 pc
LED Label special paper Letter, 1 pc
Manuals
Note: One (1) IED Connect USB flash drive containing user documentation (Operation manual, Technical
manual, Installation manual, Commissioning manual, Application manual and Getting started guide),
Connectivity packages and LED label template is always included for each IED.
Rule: Specify additional quantity of IED Connect USB flash drive requested .
142
SEMOD130267-5 v6
M15042-3 v4
SEMOD131414-4 v3
1MRK 502 074-BEN A
Quantity: 1MRK 000 611-A
Ordering number
Quantity: 1MRK 002 420-Z
Quantity: 1MRK 002 108-BA
Quantity: RK795102-AD
Quantity: 1MRK 001 665-CA
Quantity: 1MRK 002 038-CA
Quantity: 1MRK 002 038-DA
Quantity: 1MRK 002 290-AE
IP15161-1 v1
SEMOD130356-4 v6
IP15162-1 v2
M15161-3 v13
ABB