Accessories
Sensing Head
Fixed Mounting Bracket
Polarizing Filter
End Cap
Air Purge Collar
Sensing Head with Water Cooled
Housing Option
Mounting Nut
Adjustable Mounting Bracket
Figure 28: Sensing Head with Air/Water-Cooled Housing Option
9.2 Fixed Mounting Bracket
The Fixed Mounting Bracket accessory can be used if the sensor will always remain in a fixed location.
Figure 29: Fixed Mounting Bracket
9.3 Air Purge Collar
The Air Purge Collar accessory is used to keep dust, moisture, airborne particles, and vapors away
from the lens. It can be installed before or after the bracket. It must be screwed in fully. Air flows into
the 1/8" NPT fitting and out the front aperture. Air flow should be a maximum of (0.5 to 1.5 liters/sec
ENDURANCE 1R
45
info@Raytek-Direct.ca
1.800.868.7495
Rev. E1 Sep 2015