Write And Modification Of Teaching - Mitsubishi MELSEC-F FX2N-1RM-E-SET User Manual

FX -1RM-E-SET Programmable Cam Switch
2N
8.2.7

Write and modification of teaching

Treat the current position of the resolver as the set value.
Connect the resolver to the FX
< Key operation >
BANK 0
OUT 0
STEP 0
TEACH
Stop the resolver in
a position in which
it is to be rotated.
ON
or
OFF
Stop the resolver in
a portion in which it
is to be rotated.
GO
-1RM before turning on the power.
2N
Read the program bank No. 0.
GO
Read the output Y00.
GO
Read the step No. 0.
GO
Start to set the ON angle of the
output Y00.
Determine the ON angle.
GO
When data is newly written or
the [ON OFF] key is pressed,
the process proceeds to
setting of the OFF angle.
When the existing data is
modified, the contents of
modification are written to the
EEPROM when the [GO] key
is pressed.
Determine the OFF angle.
The ON/OFF set angle is
written to the built-in
EEPROM.
Program Operating Procedures 8
[Power ON] [PRG mode]
< Display >
BANK OUT STEP
0 0 0
*1 When a modification operation is performed,
the ON angle of the output Y00 already
registered is displayed.
The angle in the current position flashes on the
DEG .
The OFF LED is lit to indicate that the process
has proceeded to setting of the OFF angle of the
same step.
BANK OUT STEP
0 0 0
*2 When the [GO] key is pressed while modification
is performed, the OFF angle of the same step is
displayed.
When the [ON OFF] or [GO] key is pressed while
data is newly written or when the [ON OFF] key
is pressed while the existing data is modified, the
current angle flashes.
BANK OUT STEP
0 0 1
*3 When a modification operation is performed,
the ON angle of the next step already
registered is displayed.
DEG ON LED OFF LED
Exting-
Blank*1 Lit
uished
DEG ON LED OFF LED
# # # Exting-
Lit
*2 uished
DEG ON LED OFF LED
Exting-
Blank*3 Lit
uished
8-9