Table of Contents
Advertisement
FX
-1RM-E-SET Programmable Cam Switch
2N
< BFM #10 to BFM #12: Output status >
Example of BFM #10
Bit
b0
b1
b2
b3
b4
b5
b6
b7
b8
b9
b10
b11
b12
b13
b14
b15
• The bits b0 to b15 of BFM #10 correspond to Y00 to Y17, and each of b0 to b15 is turned
on or off in accordance with each output status. This output status can be read to the PLC
main unit by FROM instructions.
• BFM #11 and BFM #12 correspond to Y20 to Y37 and Y40 to Y57 respectively in the same
way, and the output status can be checked for each point.
• When two or more FX
is allocated to BFM #8010 to #8012 the third state of output is allocated to BFM #9010 to
#9012.
Description
Y00 output status
Y01 output status
Y02 output status
Y03 output status
Y04 output status
Y05 output status
Y06 output status
Y07 output status
Y10 output status
Y11 output status
Y12 output status
Y13 output status
Y14 output status
Y15 output status
Y16 output status
Y17 output status
-1RM is connected used for a main unit, the second state of output
2N
Remarks
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y01 output ON operation, 0: Y01 output OFF operation
1: Y17 output ON operation, 0: Y17 output OFF operation
BFM Assignment 7
7-7
Advertisement
Table of Contents
