Repair Procedures; Introduction - Genie GS-1530/32 Service And Repair Manual

April 2017
Section 3
Repair Pr oc edures
Observe and Obey:

Repair procedures shall be completed by a
person trained and qualified on the repair of
this machine.
 Immediately tag and remove from service a
damaged or malfunctioning machine.

Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:
 Read, understand and obey the safety rules
and operating instructions in the appropriate
operator's manual on your machine.
 Be sure that all necessary tools and parts are
available and ready for use.
 Use only Genie approved replacement parts.

Read each procedure completely and adhere
to the instructions. Attempting shortcuts may
produce hazardous conditions.
Part No. 1272217
Machine Configuration:
 Unless otherwise specified, perform each
repair procedure with the machine in the
following configuration:
• Machine parked on a firm, level surface
• Key switch in the off position with the key
• The red Emergency Stop button in the off
• Wheels chocked
• All external AC power supply disconnected
• Platform in the stowed position
GS-30 • GS-32 • GS-46 • GS-47
Service and Repair Manual

Repair Procedures

removed
position at both the ground and platform
controls
from the machine
15