Https Access Configuration - NEC N8406-023 Command Reference Manual

HTTPS Access configuration

The following table describes the HTTPS Access Configuration commands.
Table 97 HTTPS Access Configuration commands
Command
[no] access https
enable
access https port <TCP
port number>
access https generate-
certificate
access https save-
certificate
show access
Description
Enables or disables BBI access (Web access) using HTTPS. The default value is
disabled.
Command mode: Global configuration
Defines the HTTPS Web server port number. The default is 443.
Command mode: Global configuration
Allows you to generate a certificate to connect to the SSL to be used during the key
exchange. A default certificate is created when HTTPS is enabled for the first time.
The user can create a new certificate defining the information that they want to be
used in the various fields. For example:
Country Name (2 letter code) [ ]: JP
State or Province Name (full name) [ ]: Tokyo
Locality Name (for example, city) [ ]: Fuchu
Organization Name (for example, company) [ ]: NEC
Organizational Unit Name (for example, section) [ ]: SIGMABLADE
Common Name (for example, user's name) [ ]: Taro
Email (for example, email address) [ ]: info@nec.com
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
Command mode: Global configuration
Allows the client, or the Web browser, to accept the certificate and save the
certificate to Flash to be used when the switch is rebooted.
Command mode: Global configuration
Displays the current SSL Web Access configuration.
Command mode: All except User EXEC
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 98