Layer 3 Statistics - NEC N8406-023 Command Reference Manual

Layer 3 statistics

The following table describes basic Layer 3 statistics commands. The following sections provide more detailed
information and commands. Layer 3 functionality is limited in this release.
Table 54 Layer 3 Statistics commands
Command
show ip counters
clear ip counters
show ip route counters
show ip arp counters
show ip dns counters
show ip icmp counters
show ip tcp counters
show ip udp counters
show ip igmp counters
clear ip igmp [<1-4094>] counters
show ip ospf counters
show ip vrrp counters
show ip rip counters
show ip gea
show layer3 counters
Usage
Displays IP statistics.
Command mode: All except UserEXEC
Clears IP statistics. Use this command with caution as it deletes
all the IP statistics.
Command mode: All except UserEXEC
Displays route statistics.
Command mode: All except User EXEC
Displays Address Resolution Protocol (ARP) statistics.
Command mode: All except UserEXEC
Displays Domain Name System (DNS) statistics.
Command mode: All except UserEXEC
Displays ICMP statistics.
Command mode: All except UserEXEC
Displays Transmission Control Protocol (TCP) statistics.
Command mode: All except UserEXEC
Displays User Datagram Protocol (UDP) statistics. Add the
argument, clear, to clear UDP statistics.
Command mode: All except UserEXEC
Displays IGMP statistics.
Command mode: All except UserEXEC
Clears all IGMP statistics for the selected VLANs.
Command mode: All except UserEXEC
Displays OSPF statistics.
Command mode: All except UserEXEC
When virtual routers are configured, you can display the
following
Advertisements received (vrrpInAdvers)
Advertisements transmitted (vrrpOutAdvers)
Advertisements received, but ignored (vrrpBadAdvers)
Command mode: All except UserEXEC
Displays Routing Information Protocol (RIP) statistics.
Command mode: All except UserEXEC
Displays GEA statistics.
Command mode: All except UserEXEC
Displays all Layer 3 statistics.
Command mode: All
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 65