System Information Commands; Snmpv3 Information Commands - NEC N8406-023 Command Reference Manual

System Information commands

The following table describes the System Information commands.
Table 6 System Information commands
Command
show snmp-server v3
show sys-info
show logging messages
show access user

SNMPv3 Information commands

SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by
supporting the following:
a new SNMP message format
security for messages
access control
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information commands.
Table 7 SNMPv3 Information commands
Command
show snmp-server v3 user
show snmp-server v3 view
show snmp-server v3 access
show snmp-server v3 group
show snmp-server v3 community
show snmp-server v3 target-address
show snmp-server v3 target-parameters
show snmp-server v3 notify
show snmp-server v3
Usage
Displays SNMP v3 information.
Command mode: All
Displays system information, including:
System date and time
Switch model name and number
Switch name and location
Time of last boot
MAC address of the switch management processor
IP address of IP interface #1
Hardware version and part number
Software image file and version number
Configuration name
Log-in banner, if one is configured
Command mode: All
Displays most recent syslog messages.
Command mode: All
Displays User Access information.
Command mode: All except User EXEC
Usage
Displays User Security Model (USM) table information.
Command mode: All
Displays information about view name, subtrees, mask and
type of view.
Command mode: All
Displays View-based Access Control information.
Command mode: All
Displays information about the group that includes the
security model, user name, and group name.
Command mode: All
Displays information about the community table.
Command mode: All
Displays the Target Address table.
Command mode: All
Displays the Target parameters table.
Command mode: All
Displays the Notify table.
Command mode: All
Displays all the SNMPv3 information.
Command mode: All
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 17