Rip Route Redistribution Configuration - NEC N8406-023 Command Reference Manual

Table 130 RIP Interface Configuration commands
Command
[no] ip rip default-action
{both|listen|supply}
ip rip metric <1-15>
[no] ip rip authentication
type password
[no] ip rip authentication
key <password>
ip rip enable
no ip rip enable
show interface ip <1-256>
rip

RIP Route Redistribution configuration

The following table describes the RIP Route Redistribute commands.
Table 131 RIP Redistribute commands
Command
redistribute
{fixed|static|ospf|eospf}
<1-32>
no redistribute
{fixed|static|ospf|eospf}
<1-32>
[no] redistribute
{fixed|static|ospf|eospf}
export {metric <1-15>}
show ip rip redistribute
Description
When listen, the switch accepts RIP default routes from other routers, but
gives them lower priority than configured default gateways. When supply, the
switch sends RIP default routes to other routers. When both, the switch
operates as both "listen" and "supply". When no, the switch rejects RIP
default routes. This command is disabled by default.
Command mode: Interface IP
Configures the route metric, which indicates the relative distance to the
destination. The default value is
Command mode: Interface IP
Configures the authentication type. The default is
Command mode: Interface IP
Configures the authentication key password.
Command mode: Interface IP
Enables this RIP interface.
Command mode: Interface IP
Disables this RIP interface. This is the default.
Command mode: Interface IP
Displays the current RIP configuration.
Command mode: All except User EXEC
Description
Adds selected routing maps to the RIP route redistribution list. This option
adds a route map to the route redistribution list. The routes of the
redistribution protocol matched by the route maps in the route redistribution
list will be redistributed.
Command mode: Router RIP
Removes the route map from the RIP route redistribution list.
Command mode: Router RIP
Exports the routes of this protocol in which the metric and metric type are
specified. To remove a previous configuration and stop exporting the routes of
none
the protocol, enter .
Command mode: Router RIP
Displays the current RIP route redistribute configuration.
Command mode: All except User EXEC
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 120
1
.
none
.