User Access Control Configuration; User Id Configuration - NEC N8406-023 Command Reference Manual

User Access Control configuration

The following table describes the User Access Control commands.
Table 95 User Access Control Configuration commands
Command
access user eject <user
name>
access user user-
password
access user operator-
password
access user
administrator-password
show access user

User ID configuration

The following table describes the User ID Configuration commands.
Table 96 User ID Configuration commands
Command
access user <1-10> level
{user|operator|administrator}
access user <1-10> name <1-8
characters>
access user <1-10> password
access user <1-10> enable
no access user <1-10> enable
no access user <1-10>
show access user
Description
Ejects the selected user from the switch.
Command mode: Global configuration
user
Sets the user ( ) password (maximum of 128 characters). The user has no
direct responsibility for switch management. He or she can view switch status
information and statistics, but cannot make any configuration changes.
Command mode: Global configuration
oper
) password (maximum of 128 characters). The operator
Sets the operator (
manages all functions of the switch. He or she can view all switch information and
statistics and can reset ports or the entire switch.
Command mode: Global configuration
admin
Sets the administrator (
super user administrator has complete access to all information and configuration
commands on the switch, including the ability to change both the user and
administrator passwords.
Command mode: Global configuration
Displays the current user status.
Command mode: All except User EXEC
Description
Sets the Class-of-Service to define the user's authority level.
Command mode: Global configuration
Defines the user name of maximum eight characters.
Command mode: Global configuration
Sets the user password of up to 128 characters maximum.
Command mode: Global configuration
Enables the user ID.
Command mode: Global configuration
Disables the user ID.
Command mode: Global configuration
Deletes the user ID.
Command mode: Global configuration
Displays the current user ID parameters.
Command mode: All except User EXEC
N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 97
) password (maximum of 128 characters). The