Table of Contents
Advertisement
Installation
Preparing the worktop
^ Make the worktop cut-out following
the dimensions applicable.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the right or left of the cooktop.
See "Safety clearances".
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
52
If during installation the corners of
the frame are not flush with the
worktop surface, the corner radius
(ß R4) can be carefully scribed to fit.
Hide quick links:
Advertisement
Table of Contents
