Installation
Installing the cooktop
^ Feed the cooktop connection cable
down through the cut-out.
^ Lightly position the cooktop on the
spring clamps a.
^ Using both hands, press down
evenly on the sides of the cooktop
until it clicks into position. When
doing this make sure that the seal
under the cooktop sits flush with the
worktop on all sides. This is important
to ensure an effective seal all round.
Do not use sealant.
^ Connect the cooktop to the mains.
^ Check that the cooktop works.
The cooktop can now only be
removed with a special tool.
54
Wooden worktops
Granite and marble worktops