Additional Specific Safety Rules - Porter-Cable 7430 Instruction Manual

ADDITIONAL SPECIFIC SAFETY RULES

1. Always use proper guard with grinding wheel. A guard protects
operator from broken wheel fragments.
2. Accessories must be rated for at least the speed recommended on
the tool warning label. Wheels and other accessories running over
rated speed can fly apart and cause injury.
3. Hold power tools by insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will make exposed metal parts
of the tool "live" and shock the operator.
4. Always use an approved guard with those accessories that require a
guard.
5. Use proper safety equipment. Wear safety goggles to protect your
eyes and wear a protective mask to minimize breathing in the fine dust
created while sanding. NOTE: Some wood contains preservatives which
can be toxic. Take extra care to prevent inhalation and skin contact
when working with these materials.
6. Sanding of lead-based paint is not recommended. Lead-based paint
should only be removed by a professional.
7. Do not install woodcarving blade on this grinder.
8. SOME WOOD CONTAINS PRESERVATIVES WHICH CAN BE TOXIC.
Take extra care to prevent inhalation and skin contact when working
with these materials. Request, and follow, any safety information
available from your material supplier.
SYMBOL
V ........................ volts
A ........................ amperes
Hz ........................ hertz
W ........................ watts
kW ........................ kilowatts
F ........................ farads
µF ........................ microfarads
l ........................ litres
g ........................ grams
kg ........................ kilograms
bar ........................ bars
Pa ........................ pascals
h ........................ hours
min ........................ minutes
s ........................ seconds
n ........................ no-load speed
0
.../min or ...min -
or d.c. ................ direct current
or a.c. ................ alternating current
2
........................ two-phase alternating current
2
N ........................ two-phase alternating current with neutral
3
........................ three-phase alternating current
3
N ........................ three-phase alternating current with neutral
........................ rated current of the appropriate fuse-link in amperes
DEFINITION
1 ......... Revolutions or reciprocations per minute
6