Table of Contents
Advertisement
4
Hardware Installation
This section describes a full installation of hardware components in the BYB
501 cabinet. The recommended installation order is from the bottom of the
cabinet to the top.
Depending on the configuration, some pieces of hardware can be pre-installed.
Therefore, some installation steps may be irrelevant. In that case, ignore the
irrelevant step and proceed to the next one.
It is recommended to install the hardware at the cabinet locations described
in the instructions below. Although not recommended, it is possible to change
the hardware placement in the cabinet. In that case, the following constraints
must be regarded:
•
•
•
Note: The following instructions describe a hardware installation in the BYB
4.1
Overview
The following flow diagram shows the installation procedure step-by-step.
6/1531-ASP 113 01 Uen J2 2008-07-17
The batteries must be placed at the lowest position in the cabinet.
The fan unit must always be installed directly above the subracks.
Two subracks must be mounted closely, one above the other.
501 cabinet. When installing the hardware in other type of cabinets,
refer to manufacturer instructions.
Hardware Installation
25
Hide quick links:
Advertisement
Table of Contents
