Aastra MX-ONE Installation Instructions Manual page 78

Installing MX-ONE
Figure 54
•
•
•
4.11.2 Connecting Keyboard and Monitor
This section describes how to connect keyboard and monitor to multiple servers.
Table 27
Pos. Title/Function
A
B
72
Installing MX-ONE Server
Mount four captive nuts (A) ( Section 4.4 on page 41 ) according to the
number positions shown, Page 72 .
Fasten the MX-ONE Server to the four captive nuts in the cabinet, using
the four screws (C), Page 72 .
If necessary, install additional MX-ONE Servers directly above the first one
in the next available cabinet position. No gap is needed between the units.
Keyboard and Monitor Package
MX-ONE TM Keyboard and Monitor
Package
Rack Mount Server KVM Switch (8
ports)
Rack Mount Server KVM Switch
Expansion (8 ports)
Product Number
XX / KDT 252 01/1
KDU 137 390
KDU 137 346
6/1531-ASP 113 01 Uen J2 2008-07-17