Aastra MX-ONE Installation Instructions Manual page 40

Installing MX-ONE
•
•
•
4.2.7.1 Anchoring the Cabinet on a Concrete Floor
Figure 20
34
Install the two fixing irons (A) between the feet of the cabinet with the bar
(B), two screws (H), and two washers (G), Figure 19 on page 33 .
Align the holes in the fixing irons over the anchoring holes in the floor.
Tighten the two screws (H) to a torque of 80 Nm.
Installing the Expander Screw
6/1531-ASP 113 01 Uen J2 2008-07-17