Table of Contents
Advertisement
After this installation phase, all cabinets are positioned, fastened, leveled, and
anchored to the site floor.
4.2.1
Unpacking
When unpacking the cabinet, perform the following steps:
1. Open the cabinet case using the Vikex opener.
2. Lift the cabinet using a cabinet hoist or at least four people.
3. Place the cabinet on the floor in an upright position. Take extra care to
4. Remove the plastic wrapping from the cabinet.
5. Move the cabinet to its position according to the floor marking, using a
4.2.2
Cabinet Layout
Make sure all preparations for placement of cabinets at the site, including floor
marking, were done during the site planning stage, see the environmental
spec for MX-ONE SITE PLANNING.
For examples of cabinet layouts at the MX-ONE site, see the environmental
spec for MX-ONE SITE PLANNING.
4.2.3
Mounting Sets
This sections lists all the mounting sets used when mounting and grounding the
BYB 501 cabinets. Refer to the relevant mounting set table in each installation
step.
In the tables screws are named for example M 4X8, M 4 = metric thread 4
millimeters, and 8 = 8 millimeters in length.
Table 6
Cabinet Frame (normally mounted)
1/BYB 501 180 Cabinet Frame
Pos. Title/Function
RACK FRAME, H=1800, METRIC, W=450
MOUNTING BAR, H=1800, METRIC
SCREW M 4X8
A,
FOOT WITH ADJUSTING NUTS
B
DESIGNATION LABEL
6/1531-ASP 113 01 Uen J2 2008-07-17
avoid the cabinet from tipping over, as it is not yet secured to the floor.
cabinet lifter or at least four people.
Product Number
SXK 118 0444/1
SXA 210 026/1
24/SBF 228 040/0080 24
SXK 118 0159/1
SVH 290 51/2
Hardware Installation
Quantity
1
2
4
2
27
Hide quick links:
Advertisement
Table of Contents
