Time - Geist Watchdog 100 Instruction Manual

48 Watchdog 100 Instruction Manual

Time

The system clock is set here. The unit comes preconfigured with the Primary NTP Server
pool.ntp.org time servers and is set to the Western Europe Time Zone (00:00 UTC).
Should a local time server be preferred, enter its UTC offset or a local time server into the
"UTC Offset" box and click the "Save" button. The unit attempts to contact the time
servers during boot up and periodically while running. All log time stamps will present time
as the number of seconds since the unit was powered up until a time server is contacted
or the system clock is manually set.
Figure 3-26 HTTP Clock Setting
Manually Setting System Clock
1. From the Mode, click the drop down text box and select Manual.
2. Enter the Date and Time in the following format YYYY-MM-DD hh:mm:ss with time
being in 2400 hours (military time).
3. Click Save when done.
Daylight Saving Time (DST) is supported and can be change in the Daylight Saving Time
box.
GM1118 Watchdog 100 Instruction Manual
© 2017 Geist