Geist Watchdog 100 Instruction Manual page 37

Figure 3-11 Modify Action Page
Once an Action has been added, each Action has its own checkbox in the Enabled
column at the far left. The default is unchecked (disabled) when you first add each Action;
set the checkbox to enable it. This allows you to selectively turn different Actions on and
off for testing.
To delete an existing Alarm or Warning Event:
Click the Delete icon next to the Alarm or Warning Event you wish to change, then click
Delete to confirm.
Figure 3-12 Delete Action Page
GM1118 Watchdog 100 Instruction Manual
Chapter 3 - Setup
© 2017 Geist
37