Geist Watchdog 100 Instruction Manual page 30

30 Watchdog 100 Instruction Manual
Figure 3-5 Relay Labeling and Mode Select
GM1118 Watchdog 100 Instruction Manual
1. Click on the Configuration icon
2. Change label to desired name.
3. Select desired mode:
a. Alarm Control: Act according to Alarms and Warning settings.
b. Manual Control: Enable user to force the relay to energize or de-
energize. See Relay Manual Control Setting below.
4. Change label of Energize/De-energize to desired name.
5. Click Save when done.
.
© 2017 Geist