28
Watchdog 100 Instruction Manual
Device Labeling and Temperature Offset
1. Click the desired Configuration icon, and change the device's Label and Temperature
Offset as needed. Name is the device's factory name or model, and cannot be
changed.
2. Once done, click Save.
Figure 3-3 Device Labeling and Temperature Offset
Deleting a Sensor
This device and associated data and configuration can be deleted by clicking the delete
icon
and following the confirmation prompt. The deleted device must be removed,
otherwise, it will be re-detected and shown on the page.
GM1118 Watchdog 100 Instruction Manual
© 2017 Geist