Table of Contents
Advertisement
26
Watchdog 100 Instruction Manual
Chapter 3 - Setup
Web Interface
The unit is accessible via a standard, unencrypted HTTP connection as well as an
encrypted HTTPS (SSL) connection. The following web pages are available:
Sensors Page
Overview
The front page, Sensors Overview, gives both current and historical views of the unit's
data. Readings for the internal temperature, humidity and dew point sensors along with all
external sensors, such as the A2D converter, will be shown. Plug-and-play external
sensors appear below the internal sensors when attached.
Figure 3-1 Sensors Overview Page
1. Geist Logo
· Clicking on this logo from any page will reload the Sensors Overview page.
2. Sensors, System, and Help Tab
· Mouse over to show sub-menus:
· Sensors: Available options are "Overview" (this page), "Alarms and Warnings",
"Cameras", "Logging", and "Data Graphing".
· System: available options are "Users", "Network", "Web Server", "Time",
"Email", "SNMP", "Syslog", "Admin", "Locale", and "Utilities". Refer to the
appropriate section under "System".
· Help: available options are "Info" and "Support Site" Refer to the appropriate
section under "Help".
3. Log In / Log Out
· Click to log in or log out of the unit. Note that both username and password are
case sensitive and no spaces are allow. Prohibited characters for username only
GM1118 Watchdog 100 Instruction Manual
© 2017 Geist
- Quick Links:
- Snmp
Hide quick links:
Advertisement
Table of Contents
